Measuring OCSP Responder Performance with Powershell

1 Reply

The other day I did a post about testing if OCSP stapling was working, but what about telling how fast your OCSP responder is?

Well that is what this post is about, on Unix based systems with curl you would do something along these lines:

time curl –verbose –url http://ocsp2.globalsign.com/gsextendvalg2/MFMwUTBPME0wSzAJBgUrDgMCGgUA

BBSgcg6ganxiAlTyqPWd0nuk87cvpAQUsLBK/Rx1KPgcYaoT9vrBkD1rFqMCEhEh

D0Xjo/V7lgq3ziGoWG69rA==

But there is no time on Windows so how can you do it there?

PowerShell.exe
Measure-Command {Start-Process -wait “curl” “-verbose “”http://ocsp2.globalsign.com/gsextendvalg2/MFMwUTBPME0wSzAJBgUrDgMCGgUA

BBSgcg6ganxiAlTyqPWd0nuk87cvpAQUsLBK/Rx1KPgcYaoT9vrBkD1rFqMCEhEh

D0Xjo/V7lgq3ziGoWG69rA==”””}

 

Days : 0
Hours : 0
Minutes : 0
Seconds : 0
Milliseconds : 53
Ticks : 531200
TotalDays : 6.14814814814815E-07
TotalHours : 1.47555555555556E-05
TotalMinutes : 0.000885333333333333
TotalSeconds : 0.05312
TotalMilliseconds : 53.12

 

Here you see that it took 53 milliseconds to run the command, its important to note that there different overhead buried each time measurement approach (time vs Measure-Command) that make it inappropriate to compare the results from two approaches. With that said its still a good way to measure performance over time when using a single measurement approach.

Also if you wanted to do the same measurement for POSTs the command would look like one of these :

Measure-Command {Start-Process -wait “openssl” “ocsp -noverify -no_nonce -respout ocspglobalsignca.resp -reqout ocspglobalsignca.req

-issuer globalsigng2.cer -cert globalsign.com.cer -url “”http://ocsp2.globalsign.com/gsextendvalg2″” -header “”HOST”” “”ocsp2.globalsign.com”””}

 

Measure-Command {Start-Process -wait “curl” “-verbose -data-binary  @ocspglobalsignca.req -H “”Content-Type:application/ocsp-request””

http://ocsp2.globalsign.com/gsextendvalg2″}

Pulse data publicly availible

Leave a reply

SSL Pulse is an initiative ran by Qualys to monitor the overall health of the SSL deployments on the Internet. It is based on the SSLLABS work Ivan Ristik has done; he has recently published the data used to derive these reports.

There are some interesting findings in buried in the raw data, for example:

  • Most of the certificates (85%?) are expired.
  • Most of the certificates are self-signed or from internal PKIs.
  • Those 5 “shorter than 1024bit” keys in the Pulse Dashboard are down to 3 (based on manual verification) are time valid certificates from public CAs, two expire this year the last in 2014.
Host Issuance Date Expiration Date Key Size Issuer
www.pysoft.com 01/25/2009 02/24/2014 512 Equifax Secure Global eBusiness CA-1
www.comlink.com.br 10/13/2009 11/07/2012 512 Thawte Premium Server CA
www.rtp.com 04/13/2009 06/04/2012 512 Thawte Premium Server CA

 

  • There are 2,472 RSAwithMD5 certificates in the 215,607 sample-set or around .01% of the hosts.

This last point gives us some context to some numbers Venafi published recently, they indicated 17.4% of the certificates they see are signed using MD5; this is a rate significantly higher than what we see here. Its probably safe to assume the difference is that their sample is primarily derived from intranets where private CAs are commonly are set up and forgotten.

For me the largest conclusion we can take from this data appears to be that there is a large number of organizations who set-up SSL (and PKIs) and simply forget about them – this is of course not a surprise but it’s neat to see it backed up with numbers.

Ryan

 

A look at the new Windows Update SSL certificates

17 Replies

This morning I noticed a tweet by Mikko about the Windows Update certificate chain looking odd so I decided to take a look myself.

I started with the webserver configuration using SSLLABS, unfortunately it did not fare well:

Looking a little closer we see a few things of interest:

  • SSLLABS is unable to validate the certificate
  • The server is using weak ciphers
  • The server is vulnerable to the BEAST attack
  • The server is not using an Extended Validation  (EV) Certificate
  • The server is supporting SSL 2.0

To understand the specifics here we needed to look a little deeper, the OpenSSL s_client is a great tool for this:

openssl s_client –showcerts -status –connect www.update.microsoft.com:443

Loading ‘screen’ into random state – done

CONNECTED(0000017C)

OCSP response: no response sent

depth=1 C = US, ST = Washington, L = Redmond, O = Microsoft Corporation, CN = Microsoft Update Secure Server CA 1

verify error:num=20:unable to get local issuer certificate

verify return:0

—

Certificate chain

0 s:/C=US/ST=Washington/L=Redmond/O=Microsoft/OU=WUPDS/CN=www.update.microsoft.com

i:/C=US/ST=Washington/L=Redmond/O=Microsoft Corporation/CN=Microsoft Update Secure Server CA 1

1 s:/C=US/ST=Washington/L=Redmond/O=Microsoft Corporation/CN=Microsoft Update Secure Server CA 1

i:/DC=com/DC=microsoft/CN=Microsoft Root Certificate Authority

—

Server certificate

—–BEGIN CERTIFICATE—–

MIIF4TCCA8mgAwIBAgITMwAAAAPxs7enAjT5gQAAAAAAAzANBgkqhkiG9w0BAQUF

…

—–END CERTIFICATE—–

1 s:/C=US/ST=Washington/L=Redmond/O=Microsoft Corporation/CN=Microsoft Update S

ecure Server CA 1

i:/DC=com/DC=microsoft/CN=Microsoft Root Certificate Authority

—–BEGIN CERTIFICATE—–

MIIGwDCCBKigAwIBAgITMwAAADTNCXaXRxx1YwAAAAAANDANBgkqhkiG9w0BAQUF

…

—–END CERTIFICATE—–

subject=/C=US/ST=Washington/L=Redmond/O=Microsoft/OU=WUPDS/CN=www.update.microsoft.com issuer=/C=US/ST=Washington/L=Redmond/O=Microsoft Corporation/CN=Microsoft Update

Secure Server CA 1

—

No client certificate CA names sent

—

SSL handshake has read 3403 bytes and written 536 bytes

—

New, TLSv1/SSLv3, Cipher is AES128-SHA

Server public key is 2048 bit

Secure Renegotiation IS supported

Compression: NONE

Expansion: NONE

SSL-Session:

Protocol  : TLSv1

Cipher    : AES128-SHA

Session-ID: 33240000580DB2DE3D476EDAF84BEF7B357988A66A05249F71F4B7C90AB62986

 

Session-ID-ctx:

Master-Key: BD56664815654CA31DF75E7D6C35BD43D03186A2BDA4071CE188DF3AA296B1F9674BE721C90109179749AF2D7F1F6EE5

Key-Arg   : None

PSK identity: None

PSK identity hint: None

Start Time: 1339954151

Timeout   : 300 (sec)

Verify return code: 20 (unable to get local issuer certificate)

—

read:errno=10054

 

With this detail we can also look at the certificates with the Windows Certificate viewer, we just extract the server certificate Base64 and put it into a text file with a .cer extension and open it with Explorer:

   
   
   

 

From these we see a few additional things:

  • OCSP Stapling is not enabled on the server
  • The issuing CA was created on 5/30/2012 at 8:49pm
  • The issuing CA was issued by the 2001 SHA1 “Microsoft Root Authority”

So with this extra information let’s tackle each of these observations and see what conclusions we come to.

 

SSLLABS is unable to validate the certificate; there are two possible reasons:

a. The server isn’t including the intermediate certificates (it is) and SSLLABS doesn’t chase intermediates specified in the AIA:IssuerCert extension (doubt it does) or that extension isn’t present (it is).

b. The Root CA isn’t trusted by SSLLABS (which appears to be the case here).

My guess based on this is that Ivan only included the certificates in the “Third-Party Root Certification Authorities” store and did not include those in the “Trusted Root Certification Authorities” which are required for Windows to work.

Basically he never expected these Roots to be used to authenticate a public website.

[2:00 PM 6/18/2012] Ivan has confirmed he currently only checks the Mozilla trusted roots, therefor this root wouldn’t be trusted by SSLLABS.

Microsoft’s decision to use this roots means that any browser that doesn’t use the CryptoAPI certificate validation functions (Safari, Opera, Chrome on non-Windows platforms, Firefox, etc.) will fail to validate this certificate.

This was probably done to allow them to do pinning using the “Microsoft” policy in CertVerifyCertificateChainPolicy.

I believe this was not the right approach since I think it’s probably legitimate to use another browser to download patches.

[2:00 PM 6/18/2012] The assumption in this statement (and it may turn out I am wrong) is that it is possible for someone to reach a path where from a browser they can download patches; its my understanding this is an experience that XP machines using a different browser have when visiting this URL I — I have not verified this.

[3:00 PM 6/18/2012] Harry says that you have not been able to download from these URLs without IE ever, so this would be a non-issue if that is the case.

To address this Microsoft would need to either:

  • Have their PKI operate in accordance with the requirements that other CAs have to meet and be audited and be found to meet the requirements of each of the root programs that are out there.
  • Have two separate URLs and certificate chains one for the website anchored under a publicly trusted CA and another under this private “Product” root. The manifests would be downloaded from the “Product” root backed host and the web experience would be from the “Public” root backed host.
  • Cross certifying the issuing CA “Microsoft Update Secure Server CA 1” under a public CA also (cross certification), for example under their IT root that is publically trusted and include that intermediate in the web server configuration also. Then have a CertVerifyCertificateChainPolicy implementation that checks for that CA instead of the “Product” roots.

 

The server is using weak ciphers; the server is using several weak ciphers:


I see no reason to support the MD5 based ciphers as I find it hard to believe that there are any clients that can communicate with this site that do not support their SHA1 equivalents.

 

[2:00 PM 6/18/2012] I have been told I am too critical by calling these MD5 based ciphers as weak in that they are used as HMAC, it is true that when used with a key as is the case with HMAC the current attacks are not relevant. With that said any client that supports these suites will also support their SHA1 counterpart and there is no reason to support the weaker suites that use MD5.

 

The server is vulnerable to the BEAST attack; and SSLLABS isn’t able to tell if the server is specifying a cipher suite preference, this means it probably is not.

It is the cipher suite ordering issue that is actually resulting in the warning about the BEAST attack though. It is addressed by putting RC4 cipher suites at the top of the cipher suite order list.

[2:00 PM 6/18/2012] It’s been argued the BEAST attack isn’t relevant here because the client is normally not a browser, these pages that are returned do contain JS and there are cases where users visit it via the browser — otherwise there would not be HTML and JS in them. As such the attacker could use the attack to influence you to install malicious content as if it came from Microsoft. Maybe its not a leakage of personal information initially but its an issue.

 

It is not using an Extended Validation (EV) Certificate; this is an odd one, is an EV certificates necessary when someone is attesting to their own identity? Technically I would argue no, however no one can reasonably expect a user to go and look at a certificate chain and be knowledgeable enough to that this is what is going on.

The only mechanism to communicate the identity to the user in as clear a way is to make the certificate be an EV certificate.

Microsoft really should re-issue this certificate as an EV certificate – if there was ever a case to be sure who you are talking to it would certainly include when you are installing kernel mode drivers.

 

The server is supporting SSL 2.0; this also has to be an oversight in the servers configuration of SSL 2.0 has been known to have numerous security issues for some time.

They need to disable this weak version of SSL.

 

OCSP Stapling is not enabled on the server; OCSP stapling allows a webserver to send its own revocations status along with its certificate improving performance, reliability and privacy for revocation checking. According to Netcraft Windows Update is running on IIS 7 which supports it by default.

This means Microsoft is either not allowing these web servers to make outbound connections or they have explicitly disabled this feature (login.live.com has it enabled and working). While it is not a security issue per-se enabling it certainly is a best practice and since it’s on by default it seems they are intentionally not doing it for some reason.

 

The issuing CA was created on 5/30/2012 at 8:49pm; this isn’t a security issue but it’s interesting that the issuing CA was created four days before the Flame Security advisory. It was a late night for the folks operating the CA.

 

That’s it for now,

 

Ryan

What is your organizations policy on SSL?

Leave a reply

In other posts I discussed how to redirect the initial request to a website from the HTTP version to the HTTPS  (for Apache and IIS).

By following those steps your website no longer will serve HTTP content but users will still be able to get to your site without having to know to type the HTTPS:\\ before they browse to your site.

This is an important part of making your site reachable by users over SSL because:

  1. Most users do not type a URL moniker at all when entering an URL.
  2. Since 99% of the traffic on the Internet is not available over HTTPS so browsers default to HTTP.
  3. Existing HTTP URLs that have been indexed by search engines, embedded in documents, passed off in emails can continue to work.

This approach isn’t perfect, for example:

  1. An attacker can perform a Man-In-The-Middle on the initial request and bypass the SSL protection (see sslstrip).
  2. It has the potential to “train users” to not navigate to the HTTPs version of your site initially.

The problem is of course that the alternative of returning an error when a user requests the HTTP version of the website (say a 403.4 – SSL required) or simply not having a server listening on the HTTP port is almost the same as saying your site isn’t accessible to the mainstream users.

So how can you manage these problems? There are a few things you can do:

For sensitive services like those for login and those that collect personal information or credit cards actually use 403.4 errors. This tells the user in no uncertain terms that SSL is required for that task but since the browsing experience does not typically “start here” you do break the user experience for your users.

You may also want to consider hosting the most sensitive content like login and account details on a separate virtual host that does not have a HTTP listener (for example login.example.com or accounts.example.com).

Next you should communicate your policy on SSL to the web browsers so they can do the right thing for the users, there are several ways for you to do this:

  1. Set the HTTP Strict-Transport-Security (HSTS) header for your pages this will tell the browsers to require SSL on your site.
  2. Request that your site be added to the HTTPS Everywhere Rule list.
  3. Request that your site be added to the Preloaded HSTS list in Google Chrome.
  4. If you are a larger site you can also request that Google “pin” your web server’s public keys to your domain.

These things will not eliminate these risks but it does help, especially for those using browsers that support HSTS (Chrome and Firefox as of today) or those that are using plugins like HTTPS Everywhere and NoScript.

As for the last two, they are clearly Chrome specific but it represents about 32% of the browser market today and as such is worth paying attention to.

Ryan

Additional Resources

How to Deploy HTTPS Correctly

 

Redirecting HTTP to HTTPS in IIS

Leave a reply

So you have been using SSL on your IIS 7.5 or greater server for some time now; to get here you had to do a few things:

  1. You scrubbed your site content to ensure all URLs are using their relative form, e.g. “src=’//images\image.png” or explicitly reference the use of HTTPS.
  2. You have tested for certificate and SSL related problems like mixed content, appropriately tagging cookies as secure.
  3. You have ensured that you follow the best practices guidance for SSL server configuration and verified you get an A on  SSLLabs.

Are you done? Not yet there are a few things left for you to do, the most obvious being redirecting all traffic to the SSL version of your site!

This is easy enough to accomplish but before you do so you should probably monitor your CPU usage during your peak so to ensure you have some headroom. This isn’t likely to be a problem as most web-servers are not CPU bound but it’s always good to check.

Once you know you are OK then it’s just a matter of deciding which approach to use, you have two choices:

  1. Dynamically rewriting via code in your ASPX pages
  2. Using the IIS URL Rewrite  module

If you are familiar with the IIS configuration you’re probably asking yourself what about the “Require secure channel (SSL)” option in the IIS MMC? Unfortunately this doesn’t do redirecting it only requires the use of SSL on a given site/folder/file.

So how do you decide which approach to use? The answer to that question is dependent on both your environment and personal preference.

For example if 100% of your site is ASPX based (no static HTML), you have your code structured so that there is a common include and you are not already using the URL Rewrite module I would use method one based on KB239875.

I suspect that these conditions will not be met for most people so let’s focus on method two, using the URL Rewrite  module.

This approach has a number of benefits, for one having this module allows you to leverage remapping for other purposes also for example maintaining old links that have SEO value. From a security standpoint it’s also a good approach as it keeps this decision one of policy that is enforced in a central place.

To use the URL rewrite approach you will need to do the following:

 

1. Install the URL Rewrite module (x86, x64).

2. Add a rule to rewrite all HTTP URLs to HTTPS.

a. Open your “web.config” with your favorite editor.

b. Find the “configuration\system.webserver\rewrite\rules” section.

c. Add the following text block:

<rule name=”Redirect to HTTPS” stopProcessing=”true”>

<match url=”(.*)” />

<conditions>

<add input=”{HTTPS}” pattern=”^OFF$” />

</conditions>

<action type=”Redirect” url=”https://{HTTP_HOST}/{R:1}” redirectType=”Permanent” />

</rule>

3. Restart IIS.

Now just go to your website over HTTP and you will see you are redirected to the HTTPS instance of the site.

 

Ryan

Additional Resources

IIS Rewrite Module Configuration Reference

10 URL Rewriting Tips and Tricks

Automatically redirect HTTP requests to HTTPS on IIS7 using URL Rewrite 2.0

 

 

Redirecting HTTP to HTTPS in Apache

Leave a reply

So you have been using SSL on your Apache website for some time now; to get here you had to do a few things:

  1. You scrubbed your site content to ensure all URLs are using their relative form, e.g. “src=’//images\image.png” or explicitly reference the use of HTTPs.
  2. You have tested for certificate and SSL related problems like mixed content, appropriately tagging cookies as secure.
  3. You have ensured that you follow the best practices guidance for SSL server configuration and verified you get an A on  SSLLabs.

Are you done? Not yet there are a few things left for you to do, the most obvious being redirecting all traffic to the SSL version of your site!

This is easy enough to accomplish but before you do so you should probably monitor your CPU usage during your peak so to ensure you have some headroom. This isn’t likely to be a problem as most web-servers are not CPU bound but it’s always good to check.

Once you know you are OK then it’s just a matter of turning it on which requires:

1. Re-writing HTTP URLs from HTTP to HTTPS via .htaccess  by adding the following lines (or their equivalents):

RewriteEngine On

RewriteCond %{HTTPS} off

RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} [R=301,L]

2. Restarting Apache

Now just go to your website over HTTP and you will see you are redirected to the HTTPS instance of the site.

Ryan

 

Additional Resources

RewriteRule Flags

Mod_Rewrite

 

 

Was the Flame WSUS attack caused just because of the use of MD5?

Leave a reply

This morning I saw a number of posts on Twitter about Flame and the attacks use of a collision attack against MD5.

This flurry of posts was brought on about by Venafi, they have good tools for enterprises for assessing what certificates they have in their environments, what algorithms are used, when the certificates expire, etc. These tools are also part of their suite used for certificate management.

They published some statistics on the usage of MD5, specifically they say they see MD5 in 17.4% of the certificates seen by their assessment tools. Their assessment tool can be thought of as a combination of nmap and sslyze with a reporting module.

Based on this we can assume the certificates they found are limited to SSL certificates, this by itself is interesting but not indicative of being vulnerable to the same attack that was used by Flame in this case.

 

 

Don’t get me wrong Microsoft absolutely should not have been issuing certificates signed using MD5 but the collision was not caused (at least exclusively) by their use of MD5; it was a union of:

  1. Use of non-random serial numbers
  2. Use of 512 bit RSA keys
  3. Use of MD5 as a hashing algorithm
  4. Poorly thought out certificate profiles

If any one of these things changed the attack would have become more difficult, additionally if they had their PKI thought out well the only thing at risk would have been their license revenue.

If it was strictly about MD5 Microsoft’s announcement the other day about blocking RSA keys smaller than 1024 bit would have also included MD5 – but it did not.

So what does this mean for you? Well you shouldn’t be using MD5 and if you are you should stop and question your vendors who are sending you down the path of doing so but you also need to take a holistic look at your use of PKI and make sure you are actually using best practices (key length, serial numbers, etc). With that said the sky is not falling, walk don’t run to the nearest fire escape.

Ryan

RSA keys under 1024 bits and you

Leave a reply

Recently Microsoft announced that they will push an update in August that will prevent the use of RSA keys with a bit-length less than 1024.

This has been a change that has been coming for some time, for example Microsoft has not allowed CAs with such small keys in their root program for quite a while. They have been proponents of the key length restrictions in the current Baseline Requirements for SSL/TLS certificates in the CA/Browser Forum.

Despite this the SSL Pulse project still shows that within the top 1 million websites there are still web servers using keys less than 1024 bits in size (5 of them). While I do not know who the issuers of these certificates are (they are not GlobalSign), the Microsoft Root Program had prohibited the issuance of smaller than 1024 bit keys and the new Baseline requirements require that all certificates 1024 bits in length expire before December 2013 so if my guess is these would have naturally expired by then.

This patch will cause those certificates to fail to validate once applied.

Microsoft is adverse to “breaking things” they do not control; it’s easy to understand why. With that in mind we can we can assume the decision to release this policy in the form of a patch is clearly based on the recent PKI issues used by Flame which was only possible because of a its use of weak crypto.

But what does this mean for you? Well in the context of getting TLS certificates from a CA who is trusted by Microsoft or Mozilla you shouldn’t be impacted at all since no CA should have been issuing certificates with such small keys.

That said in an enterprise it’s certainly possible such certificates exist and if you have an internal PKI you need to ensure they don’t in yours before this patch gets deployed in August or those systems will stop working.

Microsoft provides some guidance on how to look for these certificates but your likely better off running a tool like Venafi Accessor against your environment to find what keys and certificates you have deployed.

They release their “assessment tool” for free as a means to market to you their certificate management products, the marketing material is alarmist (and in some cases a little misleading) but the assessment tool I good and will be useful to organizations who need to understand the implications to their environment.

Ryan

Testing OCSP Stapling

9 Replies

So you have configured OCSP stapling and you want know if it’s actually working, it’s easy enough to check using the openssl  s_client command:

openssl s_client -connect login.live.com:443 -tls1  -tlsextdebug  -status

Loading ‘screen’ into random state – done

CONNECTED(0000017C)

TLS server extension “status request” (id=5), len=0

….

OCSP response:

======================================

OCSP Response Data:

OCSP Response Status: successful (0x0)

…

Cert Status: good

This Update: Jun 12 02:58:39 2012 GMT

Next Update: Jun 19 02:58:39 2012 GMT

…

In this example you see that the client is requesting the servers OCSP response, you then see the server providing that response successfully and openssl determining the servers certificate is good.

For another example we can query the US Mint’s website for an example of a site that has not yet (and probably won’t for some time since it’s a government site) configured OCSP stapling:

openssl s_client -connect www.usmint.gov:443 -tls1  -tlsextdebug  -status

Loading ‘screen’ into random state – done

CONNECTED(0000017C)

OCSP response: no response sent

….

Hope this helps you deploy OCSP Stapling successfully.

Ryan

OCSP Stapling in IIS

3 Replies

Windows Server 2008 and later support a feature called OCSP stapling. When enabled a server pre-fetches the OCSP response for its own certificate and delivers it to the user’s browser during the TLS handshake. This approach offers a privacy advantage. But, the main benefit is the browser doesn’t have to make a separate connection to the CA’s revocation service before it can display the Web page. This gives better performance and reliability.

For this pre-fetching to work the web-server certificate needs to contain a pointer to the OCSP responder, this is a best practice and a recommendation of the CA/Browser Forums baseline requirements so it’s almost certain your certificate has it.

Unlike Apache this feature is enabled by default, it’s possible your servers are already doing OCSP stapling and you do not even know it.

With that said chances are you have a firewall between your webservers and the internet; it’s also likely that firewall disallows outbound connections from your servers unless explicitly allowed. So you might need to allow your web servers to communicate with the OCSP responder before it will work.

To figure out what host and port you will need to open you will need to look at the certificates you use on your webserver; one way to do that is to browse to your current site and view the details of the certificates you are currently using, for example:
   

The value you want is in the “Authority Information Access” field, you want the ones (there may be multiple) that have the “Access Method” of “On-line Certificate Status Protocol”.

Once these two conditions are met OCSP Stapling will “Just work” there is nothing else you need to do.

Ryan